With a name derived from its Sex Pistols-inspired color scheme, the “Swindle” distortion pedal from UT&T seems designed to emulate the BIG GUITAR sounds of the ’70s. With just two knobs — volume (left) and gain (right) — the Swindle delivers a trouser-load of boost and a smoothly ascending gain. The controls are very interactive, eliciting a surprisingly wide range of raunch, and the pedal cleans up quite nicely with a some roll-back on your guitar’s volume knob, making it a prime candidate for an “always-on” tone shaper that can also cut through the mix when it’s time for your solo.
Check out my no-frills video for some Swindle riffage:
Big Q I can’t answer: “The EHX Big Muff Pi is conspicuous for its very ubiquity. But does it really deserve its exclusive status as the “fuzz of all fuzzes”?’
Few if any axe-grinders have taken to the concert stage without the giant silver wedge of an Electro-Harmonix Big Muff Pi at their feet at one time or another. My first was an army-green Sovtek that I picked up at the local music store/pawnshop I frequented in my teens. I remember being fascinated by the Cyrillic lettering on the pedal’s wooden box, both amazed and confused that this piece of Soviet engineering had found its way to me, in Morristown, Tennessee. I knew nothing of the Big Muff’s long history, or that Sovtek was really just Electro-Harmonix (builder of my first stomp box: a red and black “Small Stone” phase shifter) in exile. That big green wedge was gateway to a whole new universe of tones — and volume — and it was a mainstay at my feet for the better part of twenty-five years. When I sold ‘Big Green’ in order to finance some new gear I coveted, I almost immediately regretted it; despite there being countless new, different, and even ‘fuzzier’ options available, I missed the tried-and-true sound of my BMP. After a flirtation with going fuzz-less, I was soon pulled back toward the furry side with the EHX’s Big Muff Pi w/ Tone Wicker, which found a home on my board until, lo and behold, I happened upon the Nano Big Muff Pi — the most unintentionally oxymoronic pedal of all time. How can it be ‘nano’ and ‘big’ at the same time?
Not being a wizard myself, I can’t tell you what kind of spell Mike Matthews and his Brooklyn-based coven slapped on this Lego-brick of a stomp box. What I can tell you is that they somehow shrunk all the best parts of the Big Muff Pi into a teeny enclosure that somehow generates its own unique brand of fairy dust. I have both a newish, big-ass-silver-box “NYC” BMP and a newish Nano BMP, and the Nano stands shoulder to shoulder in terms of in-your-face hairiness, and outshines the full-size BMP in clarity. Maybe my ears are biased, but the Nano actually sounds better to me: just a little bit sharper, letting just a wee bit more of my pick attack come through.
Now, if EHX could just get with the program and start using center-negative 9V inputs like everyone else does, we could really get down to business!
Since the People of the Interwebz have been so kind to offer information, insight, and detailed tutorials that I’ve found incredibly helpful in pursuing my various DIY projects, I thought I’d contribute by detailing my fix-it process with the Univox EC-80 and including links to many of the resources that I’ve found helpful. I hope all of the folks whose pages, words and images I link to will consider this blog post to be thanks and acknowledgment for all of the help they’ve given me!
So, back in early April I spotted an auction on eBay that caught my eye: a “not working, for parts or repair” Univox tape echo. I have a saved search on eBay for broken guitar effects, and the Univox was listed under that; although it’s not exclusively a guitar effect, it is best known as part of the early Van Halen guitar sound, most specifically the ‘dive bomb’ effects at the end of Eddie Van Halen’s famous “Eruption” solo track on their first album. It’s no one-trick-pony, though. Browsing through YouTube I found some good demos of working EC-80s, and I was definitely hooked. I created a still-growing playlist here, if you’re interested: https://www.youtube.com/playlist?list=PLg9tD7zL7WpZKoyj_piyqvIDv-h39fm0S
I made what I thought was a low but possibly winning bid — about half of the supposed current value of the unit — and, what do you know, a few days later the old black box is on my kitchen table! My 3 year old assisted me in an initial “will it turn on?” test, the first step in the fix-it process: the power indicator light came on and, more importantly, the tape motor started whirring gently. Very good news.
I’d already hit the interwebz via google and various guitar and gear forums for a basic primer on this unit’s issues and quirks. The biggest one seemed to be the scarcity of the Apollon HD-5000 tape cartridges that were the only exact match for the EC-80. My unit arrived without a tape (which I knew would be the case) but lucky for me gear DIYers had been working to find ways around tape issues for awhile. There were companies that made repros of the old Apollons, would repair and/or put new tape in old or broken cartridges. Tape nuts had also posted instructions on repairing the Apollons DIY, and discovered that old PlayTapes would fit the EC-80 with some modification to the tapes or to the unit itself.
Hedging my bets, I nabbed a broken Apollon cartridge ($20) and two working PlayTapes ($10 each) off ebay; about a week later, tapes were in hand, and I was ready to see if this box was going to make any noise!
To be continued …
The auto-wah, touch-wah/envelope filter is a bit of a niche effect. Die-hard rockers and funkmeisters always seem to go for the clunky, full-size Vox or Dunlop wahs, and there are no shortage of those and their imitators to go around. I could never get the hang of constantly working a pedal with my foot while having to focus on what my hands were (supposed to be) doing. I can’t pat my head and rub my stomach at the same time, either. For the hopelessly uncoordinated who still want to get funky, a wah/filter effects pedal is a must-have. Since trading away my first Cry Baby after many thwarted attempts at playing “Tales of Brave Ulysses,” I’ve owned several of them. My first was a little purple Guyatone WR2 “Wah Rocker” that I bought used out of the window of a music store in Nashville for around $90, I think, in 2004. It was a very simple auto wah, with knobs for Threshold and Decay, and a bypass switch. Even an idiot like me could use it! Sadly, it disappeared somewhere along the long, winding and somewhat inebriatedly navigated road of my semi-professional music career. At this very moment it’s probably being used as a door stop in the ladies’ bathroom at a truck stop somewhere between Richmond and Bristol, VA. Enjoy your second life, my tiny purple friend!
My next companion in the funk wars was the dutifully named Modtone Funk Filter. With three knobs, which included settings for low pass, mid pass, and high pass filters, it was more tweakable, if less actually ‘funky’ than the Guyatone. Still, it had a thick tone, especially in the ‘mp’ setting, that fattened up single string riffs and give an interesting punch to my brief solo breaks. Unlike the Guyatone, which was an auto-wah (the sweep of the filter — what’s controlled by the pedal on a “big” wah pedal — is automatic, and controlled by a speed, or in the case of the WR2, a “Decay” knob), the MFF is a touch-wah or classic envelope filter: it responds to the signal going in, and an “attack” control gauges how sensitive the filters affect is to your playing dynamics.
Speaking of breaks, the Modtone is now broken. The 9V input assembly cracked (that’s weird, I know!) but that was a simple enough, straight-forward fix: $1 for a new power jack and some soldering time. However, I am not the world’s most deft electrical tinkerer; when attaching the new 9V assemble (which worked!), I also seemed to have dripped some solder or got something too hot — in any case, now it powers up, but doesn’t work. It will probably take awhile before I can trace down all the components that will need to be replaced in order to fix what I unfixed when I was fixing. No worries, though, as it joins yet another broken Modtone pedal in my “I’ll get around to it” box which I will probably cannibalize for parts.
Which leads me, finally, to the SolidGoldFX Funkzilla, which I borrowed when I recently re-upped my subscription Pedal Genie. For those of you unfamiliar with the service, it’s like Netflix for guitar pedals. You pay a monthly subscription fee, create a “wish list,” and they send you a pedal from that list. Keep it as long as you like; when you are ready to return it, put your pedal back in the provided box, and email the kind folks at Pedal Genie to request a mailing label. They will shoot it to you via email; tape it onto the padded flat rate envelope they sent along inside your pedal order, seal the boxed-up pedal into the envelope, and drop it in the mail. As soon as they receive it at the Pedal Genie office, they will send you another pedal on your list. It’s cool, and convenient, and a great way to try out unusual and/or boutique pedals before actually dropping $200-300 on one. I’ve gotten a Caroline Kilobyte, a Strymon Lex, an EHX B9 Organ Machine, a Tech21 Fuzz/Boost, and, now, the SolidGoldFx Funkzilla. Of all these, the Funkzilla has been my favorite, and it’s the only one I’ve been so enamored with that I’ve begun stalking it on Reverb and eBay. They are still running in the low $200’s, even for a used one!
The Funkzilla is more than just an auto-wah or filter effect; the ease of use, tweakability, and overall design make it almost an instrument itself. Billed as the “ultimate filter pedal,” the device comes in a sparkly purple rectangular enclosure; with its white knobs and white “Electric Company” style lettering, I was immediately struck by how ‘funky’ this pedal looked. While the rows of knobs and switches made my brain hurt a little, I decided to plug and play before searching online for a manual. It didn’t take long at all to figure out how the controls worked and to get busy using the various settings for musical inspiration.
The Funkzilla is basically a two-function monster. There’s Tap mode, which utilizes the Speed, Mode, and Depth knobs, as well as switches to select among three wave-forms, repeat-multipliers (1, 2, or 4), and >dir< which controls the “direction” of the filter’s sweep in both modes. I’d liken the Funkzilla’s Tap to an extremely tweakable Tremolo; the Mode knob gives you several different rhythmic “chopping” patterns to select from, and their character and speed are easily shaped by the aforementioned knobs, the ‘tap’ button, the wave-form selector or the multiplier switch. I could’ve spent hours playing around with just half of the pedal’s functions, but what I was looking for was the funk, so my quest continued.
Envelope mode is where you find the familiar filter effects lazy-footed guitarists are in search of — and this pedal certainly delivers. The Depth, Frequency and Attack knobs are active in this mode, and allow you to contour the filter to mimic a wide range of sound shapes, from a spanky quack to very musical, talkbox-sounding vowel sounds. And the >dir< feature really comes alive in this Envelope mode. I’d never imagined that reversing the filter sweep would do much more than muddy the initial input signal, but the effect was something nearly akin to a Slow Gear volume swell. For something I would’ve considered superfluous before trying this pedal out, the >dir< feature is one of the things that really sets this pedal apart from the pack.
My gigging experience with the Funkzilla was a very positive one. I put it after my EHX Soul Food overdrive, basically in the middle of my pedal chain. (BTW I know most sources say to put a Wah before an overdrive, fuzz or boost, but I actually prefer the ‘darker’ results of distortion going through the filter, instead of the other way around.) I stuck exclusively with Envelope mode, as I felt that I’d need more time to really get a handle on Tap mode before I could use it effectively. Even using only half the pedal, I found the results exciting and inspirational, both for rhythm and some solo passages. I had to do very little tweaking during the show, and was pleased to see that the purple sparkle of the pedal, contrasting with the white knobs and white labeling, made onstage, low-light knob twiddling easier. So, the funky color is both a stylish choice and a practical one. I don’t currently have an expression pedal that I could use to test the effect’s functionality with the added interface, but I imagine it would add even greater flexibility and increase the possibilities for live exploration and invention.
I don’t have a rating system for gear reviews — should I have one? — but if I did, I’d give the SolidGoldFX Funkzilla two thumbs up, four guitar picks, five gold stars, etc. My only knock would be the cost, but my experience with guitar effects is that you often get what you pay for, and the Funkzilla, even at $250 new (and still $200-225 used), packs a lot of value into that funky purple box!
While the extended weekend/ice-enforced stay-cation of this past week has not been a boon to my songwriting and recording, as I’d hoped (my fault for lack of focus; the kids’ fault for, well, being kids and not leaving me alone!), it has helped me make a bit of a dent in my extraneous musical gear inventory. In the past three months or so I’ve been going through a serious gear acquisition syndrome (GAS) phase. While it was always with the stated intention of finding deals on gear I could refurbish, play and tinker with, then re-sell, I’d been doing more playing than I had re-selling. Along the way I’ve learned a good deal more about guitars and electronic effects, what tools I need in order to fix them, and the importance of reading user manuals. (Maybe one day I will write a piece about all the ‘for parts or repair’ gear I’ve encountered for which ‘repairing’ meant ‘reading the damn manual and following directions.’)
In any case, my Reverb “shop” is fairly well stocked right now. Check it out, if you are curious.