Author Archives: russellwriter
I was looking for a dependable, flexible and most importantly quiet power supply for my secondary pedalboard — Boss Loop Station, EHX Freeze, Arion SD4, DigiTech PDS-1002 and a TCE Wiretap. I had heard about TRUETONE’s new “pro” line from a friend of mine who was contemplating buying a VoodooLab Mondo I was selling — I’d trimmed my big board down, stepping down to a Walrus Audio Aetos power brick.
Best intentions aside, I eventually realized that (of course) I was going to need an additional power supply. I liked the Aetos both functionally (keeps things quiet, doesn’t get hot, bright blue LEDs so I know when it’s on) and aesthetically, but instead of just grabbing another one, I went trawling on Reverb for some other alternatives. I’d been through most of the VoodooLab series at one time or another, and have never had a bad experience with one, but I always balked at the prices. And, yes, the Walrus Audio power bricks are over-priced, too, but I found mine for an almost literal steal on Reverb, so there!
Anyway, I’ve been through several Dunlop DC Bricks and the various Chinese knock-offs (the quietest of which was the first one I purchased: a Mooer Micro). What I wanted was something with the features of the VL’s, but with a lower price tag and, preferably, a more compact size. I’m using an amptop HoleyBoard for the ‘extra’ pedals, so it needs to be something I can strap under the board and still allow enough clearance for the feet of the HoleyBoard to sit evenly on a flat surface. I remembered that my friend had been happy with the PRO CS12 he’d picked up instead of the Mondo, so I hit the wilds of Reverb until I found a great deal on a nearly-new CS7.
Sorry for the long wind-up, but the pitch is this: the PRO CS7 is great. Maybe not as pretty as the Aetos, but who’s looking underneath my pedalboard anyway? Plus, with all of its great voltage options, I’m seriously thinking about switching places between the CS7 and the Aetos, as the Walrus Audio supply has everything I need for my loop/sample/mangle board and the CS7 would allow me to run a couple of my main pedals at higher voltages for more headroom. I hope this review was helpful. Please visit my Reverb store to check out some of the funky gear (always coming and going, you know how it is) — and rock on!
This story is here In Internetto Permanente so that the next time I think about selling a guitar on eBay, I won’t. It’s a cautionary tale from me to me. Dumb me to dumber me.
Here we go …
On December 11, I sold a guitar via an eBay auction to a Buyer in Quebec, Canada. He contacted me the day after the auction and asked for some additional time (three more days) to pay for the item, and I agreed. When his payment finally went through, I shipped the guitar w/ gig bag and strap to him via the International Shipping Program.
A few days after the guitar would have reached him, he filed a return request based on the guitar’s condition; he sent me a photo of what appeared to be a two-inch scratch, and described it as being along the bottom right of the guitar’s body. I hadn’t noticed or documented the scratch or the area of the body where the scratch was supposed to be in my photos or description; it might have been there when I shipped the guitar, and it might not have been. In any case, I gave him the benefit of the doubt and approved the return. This, of course, put a charge on my PayPal account equivalent to the amount he’d paid for the guitar.
Up until this point I didn’t realize that the International Shipping Program had no process for Returns. This is information that they, for good reason, do not highlight while encouraging you to use the program. As I explored the nooks and crannies of eBay, trying to find a way to generate a shipping label for the return, I eventually stumbled on the fact that if an International Buyer requests a return, you’re going to have to navigate that minefield all by yourself. Great!
I contacted the Buyer to let him know that I would reimburse him for return shipping expenses via PayPal when I issued the rest of the refund: on receipt of the returned guitar. The Buyer, however, was under the impression that instead of a refund/return I would issue him a discount or partial refund for the damage. Since he had requested a Return, and the full amount of his purchase had been charged to my PayPal account, I explained that it would have to be a Refund/Return. And since I didn’t willingly sell him a damaged item, and couldn’t verify that the scratch had been on the guitar before I sent it to him, a Refund/Return would be more appropriate.
This resulted in a flurry of messages accusing me of criminal activity, threatening to have his lawyer contact me, etc. Obviously, I’d hit a sore spot. Here’s a sample.
Eventually, I received a message from eBay recommending that I go ahead and issue a refund and pay for return shipping in order to “close the case.” [Just FYI: That is the only message that eBay ever sent directly to me regarding this transaction, and it was likely an automated message.] I did so, and sent the Buyer an additional $50 USD to cover return shipping, no questions asked.
Afterwards, I messaged the buyer several times, using the politest language I could muster, trying to ascertain when the guitar would be shipped. No answer was forthcoming.
Finally, I received an automated notice from eBay that the case was closed. So that meant I should’ve gotten the guitar back already, right? There was still no response from the Buyer, so before writing him a 5th time, I requested a refund of the $50 USD via PayPal, as I’d not received any information regarding the return shipping. The Buyer quickly refunded the money without any explanation or information regarding shipment of the guitar.
Taking this as a sign that the Buyer was indeed alive and merely ignoring my messages, dumb me, I sent another message via eBay, trying to confirm whether or not he was returning the guitar.
This time, he did respond:
It now appears that dude got himself a free guitar. It even shows up that way under my “Selling” menu in eBay:
Have I learned anything from this experience — that is, besides “don’t sell a guitar on eBay”?
Well, I’ve learned that language and cultural differences can certainly complicate business matters. Of course, I feel that I was very clear and specific in every message I sent, but how clear was I really to someone who doesn’t regularly communicate in English, as evidenced by the Buyer’s sometimes incoherent messages. And how much did the Buyer’s struggle with communicating his ideas an unfamiliar language complicate the situation. Would this transaction have gone differently if we were both using our primary languages for communication?
Or maybe I’m still being too kind and trusting. Maybe this is this just another case of someone using “the system” — in this case, an online marketplace that has replaced human interaction and human trust with policies, procedures, and automated responses — to take advantage of someone else.
Anyway, I hope he enjoys the guitar.
With a name derived from its Sex Pistols-inspired color scheme, the “Swindle” distortion pedal from UT&T seems designed to emulate the BIG GUITAR sounds of the ’70s. With just two knobs — volume (left) and gain (right) — the Swindle delivers a trouser-load of boost and a smoothly ascending gain. The controls are very interactive, eliciting a surprisingly wide range of raunch, and the pedal cleans up quite nicely with a some roll-back on your guitar’s volume knob, making it a prime candidate for an “always-on” tone shaper that can also cut through the mix when it’s time for your solo.
Check out my no-frills video for some Swindle riffage:
I plan on getting around to doing an actual review of this bad-ass stomp box, but for now here’s a quick video of some noises I made with BC’s new Monster K-Fuzz pedal, based on the Kay Fuzz used most prominently by Daniel Lanois and U2’s The Edge. Beginning tones are with the K-Fuzz in its Silicon and Stock settings, Input Gain at noon. I’m playing a Dearmond M-66 with stock Dearmond tron-style humbuckers through a Quilter 101 head on its “Tweed” setting, and there’s a touch of MXR Carbon Copy delay to add some space to the sound. I start out using the EXP out to sweep the Monster’s “Frequency” control via a Moog expression pedal. Later on you can see more clearly how Frequency relates to the K-Fuzz’s Tone when I unplug from the EXP jack and use the big knob in the top left corner to sweep through the Frequency/Tone filter.
One of my favorite ‘unheard’ guitar effects is Ibanez’s AW7 from their super-ugly but also super-versatile early 2000s Tone-Lock series. The AW in the name stands for Auto-Wah, but this stomper is not simply a clone of the usual Wah/Filter suspects. The designers of the AW7 took the auto-wah idea as a starting point and then just kept piling on the features. What they ended up with was a pedal that not only allows you to select from two distinct Wah/Filters — a standard Wah and a Low Pass Filter (LPF on the pedal) — but also gives you a sweetly raunchy Rat-like built-in distortion circuit that can be either completely off, placed BEFORE the Wah, or placed AFTER the Wah. This placement option is a cool feature that only a few boutique builders still bother with, but it allows you to experiment with a huge variety of tones. Like what? The tone chefs at Gibson.com have a good description:
Wah-wah placed before distortion will allow the distortion pedal to interact with the peaks and valleys of the Wah’s signal. Wah-wah placed after distortion will sound thick and full, but will not be as harmonically rich. It’s worth a try just to see what it sounds like, and although most players swap right back, don’t let that stop ya! Some very famous players have gone the ‘gain-into-Wah’ route.
On top of all that, you can also use the AW7 as a ‘cocked’ or fixed wah by turning the Sensitivity knob down to zero, and you’ve basically got one pedal that does the work of four. Make that five, if you count the placement-changing ability that would require a separate effects loop.
Here’s a no-frills video I did showing some of the features I mentioned above:
I was looking for a new flavor of overdrive, so when I read about there being a low gain modded version of the Mantra from pedal-makers Blackout Effectors, I immediately headed to their website to check it out. There are still a few of these LE versions (slightly ‘blem’) available on Blackout’s Customs page at a very good price, but I was able to score an even better deal on Reverb. It was definitely a worthwhile purchase. Not only do you get the seering, over-the-top high gain of the standard Mantra, but the “Lo” setting reminds me of my much-missed Hermida Mosferatu. So, not super-low gain — although you can dial back the gain, and your guitar volume, for some pretty sweet, full, clean tones — but a very nice option for those of us who like those hard-to-find tones in the margins and spaces between the sounds we are all familiar with. Another aspect of the Mantra I was impressed with was the EQ. With only Bass and Treble knobs I’m able to dial in some very different tonal shadings, and there are obvious aural differences along the entire sweep of both controls. One thing for buyers to note: there are two internal trimpots inside the pedal which, according to the folks at Blackout, are used to ‘tune’ the JFET transistors. Do NOT goof around with these and expect your pedal to sound better; you are just as likely to end up with no sound at all! And if something seems awry with your Mantra, this is also a good place to do some trouble-shooting. Using a small flathead screwdriver you can adjust the internal trimpots with the pedal on; listen for the point where the sweep of both trimpots yields the greatest overall pedal volume. Pick up one for yourself at Blackout Effectors’ online store or search for the best prices on new or used ones on Reverb.
Here’s a no-frills video I made, going through some of the low gain tones (and giving you a brief taste of the standard, hi-gain Mantra):
Big Q I can’t answer: “The EHX Big Muff Pi is conspicuous for its very ubiquity. But does it really deserve its exclusive status as the “fuzz of all fuzzes”?’
Few if any axe-grinders have taken to the concert stage without the giant silver wedge of an Electro-Harmonix Big Muff Pi at their feet at one time or another. My first was an army-green Sovtek that I picked up at the local music store/pawnshop I frequented in my teens. I remember being fascinated by the Cyrillic lettering on the pedal’s wooden box, both amazed and confused that this piece of Soviet engineering had found its way to me, in Morristown, Tennessee. I knew nothing of the Big Muff’s long history, or that Sovtek was really just Electro-Harmonix (builder of my first stomp box: a red and black “Small Stone” phase shifter) in exile. That big green wedge was gateway to a whole new universe of tones — and volume — and it was a mainstay at my feet for the better part of twenty-five years. When I sold ‘Big Green’ in order to finance some new gear I coveted, I almost immediately regretted it; despite there being countless new, different, and even ‘fuzzier’ options available, I missed the tried-and-true sound of my BMP. After a flirtation with going fuzz-less, I was soon pulled back toward the furry side with the EHX’s Big Muff Pi w/ Tone Wicker, which found a home on my board until, lo and behold, I happened upon the Nano Big Muff Pi — the most unintentionally oxymoronic pedal of all time. How can it be ‘nano’ and ‘big’ at the same time?
Not being a wizard myself, I can’t tell you what kind of spell Mike Matthews and his Brooklyn-based coven slapped on this Lego-brick of a stomp box. What I can tell you is that they somehow shrunk all the best parts of the Big Muff Pi into a teeny enclosure that somehow generates its own unique brand of fairy dust. I have both a newish, big-ass-silver-box “NYC” BMP and a newish Nano BMP, and the Nano stands shoulder to shoulder in terms of in-your-face hairiness, and outshines the full-size BMP in clarity. Maybe my ears are biased, but the Nano actually sounds better to me: just a little bit sharper, letting just a wee bit more of my pick attack come through.
Now, if EHX could just get with the program and start using center-negative 9V inputs like everyone else does, we could really get down to business!
Definitely thinking about picking up one of these Quilter mini heads — Dad Rockers NEED tiny amps!
Full disclosure before beginning, I am a “Quilter artist”, which means I am on their webpage as a player and have been mentioned in their social media. I am not an employee of Quilter or involved in any marketing or advertising company. The “free stuff” endorsement deals of yesteryear don’t exist anywhere anymore. In other words, I use and like their product. but they’re not paying me to do that. But….
They did send me one of their 101 Mini heads to beta test for them. I was not allowed to discuss, photograph, or video the little beast until the product was announced. Which just happened a few days ago. Alas, if I’d only made a video before sending it back. *sigh*
Quilter 101 Mini Head Review
So, one day I get a big box from Quilter delivered to me. I open it up, and there’s a little box inside; no…
View original post 1,224 more words
I’ve spent the past year or so trying out various tremolo pedals, in search of “the one” that can both suit my gigging needs and give me that little ‘something extra’ to spark the creation of new songs, sounds, riffs and licks. Tall order, I know. From high-priced, high-tech and boutique offerings to plain-jane no-names, quite a few contenders have spent quality time on my pedalboard. I’m not going to rank them (because ‘different strokes for different folks’), but these effects are all worthy of mention as gig-worthy Tremolos that spent considerable gigging and playing/writing time on my board:
- VHT Melo-Verb
- Black Cat Mini-Trem
- CMATmods Tremoglo
- Catalinbread Valcoder
- SolidGoldFX Stutterbox (V.1)
Note: I acquired almost all but one of these pedals second or third-hand via Reverb; I’ve also turned around and sold many of them via Reverb, once I’d decided to move on. I’ve found that this is a better and, in the end, more affordable way to “audition” pedals than using a Netflix-style effect rental service because 1) I can usually find the pedal I want when I want it, and 2) if I’m patient I can make $5-$20 per sale, beyond the initial cost of the pedal — or at least break even.
Now, I can finally declare a winner in the ‘Tournament of Tremolos’ — it’s the Empress Tremolo2. I’ve had it for about a month, now and have used it on two 3-hour gigs and for lots of at-home fiddling around. The T2 is both gig-worthy and musically inspiring, my main criteria, but it also shines in some very specific ways.
Ease of Use? — What a Concept!
The T2 has a digital heart hiding beneath its analog trappings. The Empress site describes the pedal as having an all-analog signal path with the tremolo effect “controlled digitally via opto technology.” Whatever digi-log voodoo mojo they performed works for me, because my ears don’t detect even a hint of artificiality in the tones the pedal produces.
However, the combination of technologies does explain how the T2 is able to save multiple presets (I used 4 — with some additional fiddling around, you can set up to 8!) that allow you to tweak and save all of the manual settings you make for each sound/speed/rhythm you need. I liked the four presets that came with the pedal (I have no idea if they were the factory settings or had been set by the previous owner), but ended up tweaking them to my liking and to the needs of the songs I’d be playing. After adjusting a mellow Blackface Fender-tone in preset 1, and a faster, deeper version of that in preset 2, I made preset 3 a hard, choppy Valco-style trem for a couple of more garage-y songs, and gave preset 4 a less choppy, but rhythmically unusual, flavor of the same.
Changing between presets is a breeze, even for a stone-cold idiot like me. Set the switch to “Presets” then click the bypass button — you are in preset 1 (blue LED). To switch presets, hold the tap tempo button down until the LED changes color, and there you are!
On top of all that, you can tweak each preset on the fly with the knobs on the pedal’s face. Has the drummer counted off that ballad too quickly? Then adjust your preset with the speed knob. These tweaks aren’t saved, unless you go to the trouble of saving them, but making adjustments like this quickly, without having to go through screens or menus on a digital pedal, can be a song-saver.
Go Deep — Seriously, Even Deeper!
Some boutique pedals are difficult to use right out of the box — you probably know which ones I’m talking about — because they offer so many options from the get-go that you have to read the full manual before you can even summon a tone as basic as Link Wray’s “Rumble” tremolo.
The T2 is not only is good-to-go right out of the box (note: the manual is available online and is written to get you started playing ASAP), there are features a-plenty under the hood. Yes, the T2 is gig-ready, but there are enough unique features (e.g. three wave forms, eight rhythm patters) and control options (external tap, expression, control voltage, MIDI.) to inspire you to continue deepening your knowledge of the pedal’s creative possibilities.
If you are interested in some audible samples of what the T2 can do, check out the Empress site; they have numerous sound clips showing off many of the features I’ve mentioned, and much much more.
If you are looking to purchase a T2, new or used, check out Reverb.
If you have any questions, comments, or thoughts on Tremolo pedals (or guitar effects in general), post a comment below.
One thing that being in a rock and roll band for any length of time requires is the ability to endure disappointment. Constant, bitter, crushing disappointment. If you take it to heart every time you get passed over for a gig, ignored by a crowd, or rejected in any of the million other ways a musician can get a thumbs-down, you won’t last long. It was my degree from the “school of rock” that, more than anything else, helped me reach the goal of becoming a contestant on Jeopardy. Lots of people are smart, and lots of people are good at trivia. But I took seven tests and traveled to 3 regional auditions over the course of 10 years in my quest to be a Jeopardy contestant. I’m smart, don’t get me wrong – a dummy isn’t going to make it to the Jeopardy stage, no matter how hard he or she tries – but it’s my extremely hard head, not the spongy stuff inside it, that got me to the show.
While I was good at games like Trivial Pursuit, and had been an enthusiastic participant on my high school and community college’s quiz bowl teams, I’d never considered trying to be on Jeopardy until I was in my mid-30’s and the show held a “contestant search” event at a local shopping mall. There, I aced a short trivia quiz and was given an invitation to attend a second test and possible audition at a local hotel and conference center.
If I remember correctly, there were 50-60 of us who took the longer contestant quiz (50 questions) that day. Out of that group, about a dozen lucky souls were called up by name and asked to participate in the screen test/mock game that is still part of the audition process. I was not called. But, for me, that was the motivator … I’d finally caught the bug: I wanted to be on Jeopardy!
The online tests started a few years later, and from 2009-2015 I took the online test three times, and was invited to three regional auditions: Charlotte, NC; Nashville, TN; and, finally, Atlanta, GA.
At those auditions, I took yet another test — that year’s “contestant quiz” — and participated in a screen test that consisted of playing a few minutes of Jeopardy with two other wanna-be contestants, and being interviewed — usually by Maggie.
Each time I thought I did reasonably well, but I probably got a little better through the process: I know that I was less nervous and a little less personally invested each time.
Looking back, I think it was my experience as a musician that allowed me to continue testing and auditioning, year after year, with no way of knowing if I’d ever make to the ‘big show.’ Knowing the drill from years of working with booking agents, club owners, and various entertainment industry functionaries, I took the Jeopardy staff members who’d conducted the auditions at their word when they said that if we didn’t receive a call in the next 18 months we should try again, that contestants often audition several times before being selected.
Also, I listened to, remembered, and took to heart the coaching that Maggie and other Jeopardy staffers provided at the auditions, tips such as:
- Speak up
- Be yourself
- Have fun
… and more specifically …
- Always identify the category and dollar amount (not: “That one again for $400” or “the same category for $1000”)
- Shorten the category name to keep the game moving
- Wait until the clue has been read in its entirety before trying to buzz in (hitting the clicker early results in a “lock out” of a fraction of a second — an eternity in Jeopardy time)
- Click that buzzer and keep on clicking until someone’s name is called
- Wait until you are called on to answer
- Give your answer in the form of a question, and …
- Give your answer in the form of a question!
I mention that last one twice because, well, it’s important, right?
What is “yes?”
At the third audition, in Atlanta this past spring, I found myself more interested in the behavior of the other potential players than in my own performance. I was thinking a bit like a casting director, I suppose, with an eye towards who had an interesting story, a unique vocal inflection, or a particularly quick buzzer finger. There were some standout characters, so while I was pleased with how I did, I wasn’t particularly hopeful about my chances of being selected.
I was both surprised and pleased when, only a few weeks into the new season of Jeopardy, my phone lit up with a caller ID reading “Culver City, CA.” It was Glenn, one of the show’s producers, with an invitation to be a contestant on the show in about three weeks.
Sure thing, I said.
Here goes nothing, I thought.